551 South Apollo Blvd, Suite 206
Melbourne, FL 32901-1274 USA
Hours: Monday - Friday, 8am - 5pm
Business Phone
321-727-3261

Posts tagged with "production"

Coupounder/Floater

Hours will be day shift if no one is scheduled off.  As a floater this person will need to be able to cover night shift if someone is going to be out.

Day: Mon-Thu 8am-5pm (30 min lunch) / Fri 8am-3pm (1 hr lunch)

Night: Mon-Thu 4pm start time (8 hr shift) / Fri 1pm start time

The have powder room where they measure powdered aloe, also have a liquid room.

Could also be restacking pallets with 5 gallon sealed buckets that weigh 45 lbs.

VERY safe environment – they will supply all PPE

Everyone in company chips in (pressure washing, bathrooms, window washing, ect) EVERYONE helps keep the facility clean and sanitized including GM.

Family environment!

Skill sets

– Some experience in a warehouse

– good attendance

– must have BASIC MATH SKILLS (simple fractions and decimals)

– forklift preferred but not required

– shipping and receiving knowledge preferred but not required

– able to count higher than 10 without taking off shoes

– clean background 7 years (no felonies, no misdemeanor for Theft, Violence, Fraud)

– experience with mixing ingredients not required but preferred

– can read recipe and follow verbal and written directions

– read a tape measure

– lift / carry 50-75lbs *Required

– able to bend / twist / stoop regularly *Required

Preferred personality

– someone who WANTS to work

– someone responsible to take ownership of their job

– someone who is willing to put in the effort to be there on time EVERYDAY

– someone wanting to learn more and grow in the company as a long term employee

– someone willing to work WITHOUT cell phone attached to their hand <– #1 complaint about all employee

Steel Toes / Long Pants / Short Sleeve shirt

No jewelry, nails, nail polish (not even clear), watches, wedding rings, ect.

MIG Welder

Our client is in need of an experienced MIG welder.
This position is inside of a manufacturing environment.
You must have a resume with experience listed in order to be considered.
This will be a long term contract position.
Our client will conduct a pre-hire welding test if you are selected for an interview.
You will need to bring your own mask/gloves/shoes as none will be provided for testing during interview.

Assembler

The Assembler III completes PCBA’s using soldering equipment and hand tools to install components, shields, and through-hole parts.  In addition, supports builds of electro-mechanical assemblies using hand tools, cable stripping/crimping equipment, and manual/automated test equipment.  This position is for second shift.

Duties and Responsibilities:

  • Performs SMD soldering and repair.
  • Performs all processes in an electronics production cell that includes manual assembly and operating automated equipment.
  • Assemble parts or units, position, align and fasten units to subassemblies or fixtures
  • Inspect work for defects and perform quality checks
  • Accurately read and follow work instructions
  • Work with PC to perform tests and make inventory transactions
  • Run automated tests on electronic subassemblies and units
  • Responsible for meeting production goals and running the production cell efficiently.
  • Treats safety as a priority and adheres to all health and safety protocols.
  • Communicates defects, issues and concerns with management; seeks guidance/ instruction as needed; assists in Root-Cause analysis.
  • Performs assigned jobs efficiently, with minimal errors and high-quality workmanship.
  • Perform duties with little or no supervision; other duties as assigned to support Operational needs.
  • Performs daily 5S of work area and processes.
  • Perform all duties assigned by Supervisor; OT and weekend work as necessary to support Manufacturing Operations.

Knowledge & Skills:

  • Experience working in Electronics or Electro-mechanical fabrication, assembly, and /or test environment. Prior experience with RF communication equipment is a plus.
  • Working knowledge of IPC-A-600, IPC-A-610, J-STD-001. Soldering certification preferred
  • Able to perform quality tests using automated equipment
  • Working knowledge of Microsoft Office
  • Exceptional verbal and written English communication skills
  • Experience working in an ISO9001 regulated environment
  • Ability to work under pressure and meet deadlines
  • Able to work independently and as part of a team
  • Must be able to perform accurate, repetitive, and steady work with minimal errors
  • Able to work overtime as required to support Manufacturing Operations

Qualifications:

  • Education: High School Diploma or equivalent (Trade school or Vocational training preferred)
  • Experience: Previous Soldering and Assembly experience of 5 or more years

Working Conditions & Physical Demands:

  • Work typically takes place in a normal factory and office environment requiring: walking, standing, kneeling, crouching, reaching, and hearing
  • Lifting – occasionally lift or move items over 50 pounds
  • Vision – specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus
  • Handling – test equipment, large/small tools, fixtures, parts, keyboard manipulation
  • Walking/standing for long periods of time
  • Able to use standard tools
  • Talking – communicate trouble shooting problems
  • Operate a PC and other maintenance equipment
  • Travel between floors and office buildings may be required
  • Frequently exposed to conditions such as fumes or airborne particles, moving mechanical parts, noise, vibration, oils, solvents, and chemicals
  • Occasionally exposed to a variety of extreme outside weather conditions

Electronic Service Tech II- Melbourne

The Electronic Service Technician II is responsible for troubleshooting and conducting root cause analysis with land mobile radio systems. The technician is responsible to work with portable, mobile, and occasionally base station radios. The Electronics Service Technician II should have solid knowledge of electronics theory, advanced operations of radio equipment, functions of test and diagnostic equipment (Analyzers, power meters, and other specialized equipment) as well as capable to work with computer software.

Duties and Responsibilities:

  • Test/troubleshoot to component level complex circuit card assemblies’ modules and assembled units
  • Use general purpose and complex or specialized test equipment to perform complex testing of components and assemblies
  • Assemble data and assist in the upkeep of documentation
  • Troubleshoot, repair and maintain specialized electronic test fixtures
  • Deal with more complex problems of test/troubleshooting
  • Assist engineering personnel in setting up test configurations for new designs
  • Develop theoretical working knowledge of complex digital or RF/Analog circuits
  • Understand the proper use of specialized test equipment
  • Review project instructions and blueprints to ascertain test specifications, procedures, objectives, test equipment and the nature of technical problems and possible solutions including part redesign, substitution of material or parts, or rearrangement of parts or subassemblies
  • Set up and conduct tests of complete units and components under operational conditions to investigate design proposals for improving equipment performance or other factors, or to obtain data for development, standardization and quality control
  • Record test procedures and results, numerical and graphical data and make recommendations for changes in product or test method
  • Ability to troubleshoot and fault isolate complex CCAs down to the component level with some guidance
  • Ability to understand and operate spectrum analyzers and power meters
  • The RF Electronics Technician must have the ability to work in a production environment and follow standard manufacturing processes to include ESD requirements
  • Talking with customers on the phone
  • All duties as assigned by Supervisor

Knowledge & Skills:

  • Strong computer skills including Excel, Word and Power Point required
  • Exceptional verbal and written English communication skills
  • Good analytical skills
  • Very detail-oriented, accurate and organized
  • Ability to work under pressure and meet deadlines
  • Able to work independently and as part of a team
  • Confidentiality and time management

Qualifications:

  • Education: Associate’s degree in Electronics
  • Experience: 5 years of related experience and/or training or an equivalent combination of education and experience
  • Customer service training talking with customers on the phone

Working Conditions & Physical Demands:

  • Work typically takes place in a normal production environment requiring: sitting, walking, lifting, kneeling, crouching, reaching, handling, talking, hearing and seeing
  • Operate a PC and other office equipment
  • Travel between floors and office buildings may be required
  • Environmental conditions: noise, vibration, oils, solvents, chemicals
© 2021 Southeast Staffing. All rights reserved.
Web Design and Domain names by Web.com